Don’t let a broken washer or dryer get you down. You do not need to make trips to the laundromat or watch the dirty clothes pile up. What you need to do is call an experienced local repairman who makes same-day service calls. For folks in Scottsdale, the best and first choice is the affordable and professional repair service, ASAP Scottsdale Appliance Repair.
Our technicians carry the tools to fix all major washer and dryer brands. They are experienced and well-trained in repairing all common and difficult problems on their first visit. We fill up our vans with manufacturer parts needed for all major brands of washers and dryers including RCA, LG, Kenmore, GE, Carrier, Armstrong, Bryant, Sears, Goodman, Lennox, and others!
The most common reason we are called for washer repairs is because of loud noises that the machine is making. Our technician will find the source of the loud noise and either make repairs or replace the damaged parts. The reason for the noise is typically a damaged bearing, broken pump motor or a worn belt.
WON’T TURN ON/AGITATE
When we are called to check a washing machine that will not turn on, we usually find a damaged timer, burned out thermal fuse, or broken door latch. When a washer does not agitate, the coupler, agitator cogs, transmission, drive belt need repair or replacement. And, by the way, before you call us, make sure the circuit breaker is on and the washer is plugged in!
When the washer does not spin, it just a big laundry tub. This problem is caused by a bad wax motor, motor coupling, or door latch. Call us for speedy, same-day repairs for all major brands.
Call us for speedy repairs if your washer is overflowing. It usually has a problem with the water level pressure switch, air dome tube, or water inlet valve.
NO HOT/COLD WATER
When the temperature control switch is broken or the inlet hose is damaged, your washing machine will not produce either hot or cold water. Call us for same-day help.
We check out more dryers for loud noises than for any other reason. When this happens the dryer has a worn belt, bad seals, or broken bearings.
NO HEAT/WON’T DRY
When your dryer does not heat up, it typically has a broken heating element. Other problems are a damaged cycling thermostat or a bad high limit thermostat. These parts can also be damaged in such a way that the dryer gets too hot. Call us we will check out and fix the problem on the same day.
WON’T TURN ON/TUMBLE
Dryers that don’t turn on or tumble have problems with the cycling thermostat, high limit thermostat, or a heating element. But, before you call us, make sure the appliance is plugged in. And, check to see if the circuit breaker is on or not.
WON’T TURN OFF
Damaged timers or broken door switches are the common reasons that your dryer will not stop. Call us for a same-day fix.
TIMER WON’T ADVANCE
Modern dryers go through a cycle to dry your clothes. This requires that the timer works. When it does not, that is because of the timer motor is broken or the cycling thermostat is damaged. We can fix these problems on a short, same-day service call.